15HP Air Cooled Cased Industrial Chiller

• Customization: Available
• Pump Power: 2.2kw
• Refrigerant: R22/R407c
• Model NO.: XC-15ACI
• Compressor Brand: Copeland
• Compressor Power: 13.4kw
• Inlet and Outlet Pipe: 1.5 Inch
• Max Pressure: 25m
• Cooling Capacity: 37000kcal/Hr
• Transport Package: Wooden Package
• Specification: CE
• Trademark: XINRE
• Origin: Ningbo China
• HS Code: 8419899090
• Production Capacity: 100 Sets

Product Description

XC-ACI series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.

Features:
Compressor is used "COPELAND" brand which made in the USA. The inside safety protection can guarantee the long lasting of the chiller well. The pump is used made in Taiwan and all parts of cooling system are imported from the USA, Mexico. Denmark and Japan.
Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained. Equipped with automatic water supply device in the water- tank. Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.
Larger than model XC-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste.
Complete with safety protection and error indication system, including compressor over load protection, pump over load protection, high pressure and low pressure protection and phase failure protection,
Air cooled chiller
Equipped with figure intellectualized temperature controls, which can accurately measure and control water temperature within the range of 5C-35C.
Applied Machinery: Cooling system of oil temperature, ultrasonic, high frequency machinery. Cooling
System of injection molding machinery. Cooling system of blow molding machinery. Cooling system of extruder.
Additional equipment for option: 1. Starter of timer switch. 2. Large type of water filter. 3. Protection switch for prove the electric leakage. 4. Cooling tower and pump.

Specifications		XC-03ACl	XC-05ACl	XC-08ACl	XC-10ACl	XC-12ACl	XC-15ACl
Parameter
Model
Cooling capacity	Kcal/h	6800	12040	19000	25200	34400	37000
Compressor	All-closed Vorticity
Compressor power	Kw	2.5	4.4	7	9	10.2	13.4
Refrigerant	R22
Chiler    water    pump  power	Kw	0.37	0.75	0.75	1.5	1.5	1.5
Max Flow rate of chilled water	L/min	55	120	120	200	200	217
Flow water inlet and outlet pipe	″	1″	1.5″	1.5″	1.5″	1.5″	1.5″
Cooling fan power	Kw	0.25	0.5	0.5	0.5	0.5	1
Size length	(mm)	1030	1100	1220	1220	1220	1220
Size width	(mm)	680	700	800	930	930	1050
Size height	(mm)	1270	1400	1450	1600	1600	1600
Water tank capa	L	53	88	120	200	200	240
Weight	Kg	210	290	400	450	500	550